NODE:LAB ▸ UV-SAFETY-GLASSES
UV Safety Glasses
UV-Blocking Safety Eyewear — 200-400nm
UV-blocking safety glasses for resin curing stations, UV printing, and any operation with ultraviolet light exposure. Blocks UV-A and UV-B (200-400nm). Wrap-around design prevents peripheral exposure — critical for resin post-cure stations where UV reflects off surfaces. Also used at the EufyMake E1 during UV ink curing passes.
4 specs4 capabilities2 refsOPERATIONAL
SPECIFICATIONS
ProtectionUV-A and UV-B blocking — 200-400nm range
Use CasesResin curing stations, UV printing, UV inspection lamps, EufyMake E1 UV channels
StandardANSI Z87.1 UV rated
StyleWrap-around — blocks peripheral UV exposure
CAPABILITIES
UV-A and UV-B blocking — 200-400nmWrap-around — peripheral protectionANSI Z87.1 UV ratedAnti-fog coating
TRAINING_&_REFERENCE
📝
UV Glass Protocolnote
Wear during any UV curing, UV inspection, or UV printing operation. UV eye damage is cumulative and painless — you won't feel it happening. Wrap-around is mandatory — UV reflects off work surfaces and enters from the side.
📝
Mandatory Fornote
Required for: resin curing station operation, UV printing (EufyMake E1), UV inspection lamps, UV adhesive curing. Also recommended for extended work under high-output shop lighting if photosensitive.
NOTES
UV damage is cumulative and often symptomless until it's advanced. Wrap-around design is non-negotiable — side UV exposure causes pterygium and early cataracts. Replace if lenses are scratched — scratches create UV leakage paths. Keep a pair on the EufyMake E1 at all times.