NODE:FORGE ▸ D600-ULTRA-CUT
D600 Ultra Cut - Dual Source Laser
Senfeng Tools D600 Ultra Cut — 1200W Fiber + 60W Diode
D600 Ultra Cut — dual-source CNC laser workstation with 1200W fiber + 60W diode in a single chassis. CNC-only: cutting and engraving on metals (carbon steel up to 12mm, stainless, aluminum, titanium) and non-metals (wood up to 25mm, acrylics, organics). Lead screw drive delivers ±0.01mm repeat positioning accuracy — the highest precision in the D-Series line. 600×600mm working area. 10m fiber output for flexible shop layout.
30 specs9 capabilities4 refsINCOMING
SPECIFICATIONS
TypeDual-source CNC (fiber + diode) — Ultra Cut series
Fiber Power1200W fiber laser
Diode Power60W diode laser
Fiber Wavelength1080 ± 5 nm
Diode Wavelength455 ± 5 nm (blue)
Working Area600 × 600 mm (23.6 × 23.6 in)
X-Axis Travel600 mm (23.6 in)
Y-Axis Travel600 mm (23.6 in)
Z-Axis Travel50 mm (2.0 in)
Drive MethodLead screw (high precision)
Repeat Positioning Accuracy±0.01 mm (±0.0004 in)
Max Processing Speed500 mm/s (19.7 in/s)
Max Acceleration1G
Max Carbon Steel Cut12 mm (0.47 in)
Max Wood Cut25 mm (1.0 in)
Processing ModesCNC Cutting / CNC Engraving / Non-metal Cutting / Non-metal Engraving
Recommended GasesNitrogen / Oxygen
CoolingAir-cooled
Rated Power6.6 kW
Full-load Current30A
Required Socket≥ 40A
Input Voltage110V ± 10% or 220V ± 10%, 50/60Hz
Output Fiber Length10 m (32.8 ft)
Exhaust FanDC 24V, 110 CFM
Machine Dimensions1110 × 1205 × 775 mm (43.7 × 47.4 × 30.5 in) + 680 × 430 × 580 mm (26.8 × 16.9 × 22.8 in)
Machine Weight151 kg (333 lb)
Operating Temp-10°C to 40°C (14°F to 104°F)
SafetyClass 4 Laser
Photoelectric Conversion> 30%
ETAJul 2026
CAPABILITIES
CNC metal cutting — carbon steel up to 12mm, stainless, aluminum, titaniumCNC metal engraving — fiber laser, 1080nm, deep marking and ablationNon-metal cutting — wood up to 25mm, acrylics, dark organic materialsNon-metal engraving — diode laser, 455nm, coated metals and organicsCustom knife blank profiling — SVG-to-blank: 1095, O1, D2, 440C, AEB-L, titaniumKnife maker's mark deep engraving and pattern etchingNon-FFL firearm components — rails, muzzle devices, base plates, jig toolingLead screw precision at ±0.01mm repeatability — tightest tolerance in classDual-source: switch between fiber (metal) and diode (organic/coated) without retooling
TRAINING_&_REFERENCE
↗
D600 Ultra Cut Kickstarterlink
Kickstarter campaign and full specs for the D600 Ultra Cut laser workstation.
OPEN_LINK ↗📝
Laser Safety Protocolnote
Class 4 laser enclosure required. OD-rated eyewear mandatory during operation. Interlock verification before each session. 30A full-load current requires ≥40A socket.
📝
Knife Blank Parametersnote
1095/O1/D2: nitrogen assist, ≤4.7mm single pass. 440C/AEB-L: nitrogen, 3-4mm. Titanium: ARGON ONLY — nitrogen embrittles Ti at temperature. Tab bridges on thin stock to prevent warp. Post-cut edge requires bevel grinding — laser finish is not a knife edge.
📝
Material Settings Referencenote
Cut/engrave parameters per material — speed, power, gas assist, focal offset. Maintained in shop reference binder.
NOTES
Flagship machine. Senfeng Kickstarter fulfillment. CNC-only — no handheld welder or handheld cleaning (that's the Combo/Combo Pro line). Dual-source means one machine for both metal fiber cutting/engraving and non-metal diode engraving — replaces two separate laser stations. Lead screw drive vs. belt drive on Combo models — this is the precision variant. 6.6kW rated power needs dedicated circuit. Knife blank service: customer sends SVG, we profile and ship — pre-HT or post-HT stock. Firearm parts: non-FFL components only — rails, muzzle devices, jig tooling, grip panels. No serialized receivers. No NFA items.