NODE:FORGE ▸ LASER-SAFETY-GLASSES
Laser Safety Glasses
Wavelength-Specific OD6+ Laser Safety Eyewear
Wavelength-specific laser safety glasses. OD6+ rated with matched protection for the shop's laser inventory: 1064nm (fiber laser), 450nm (diode laser), 10.6µm (CO₂ laser). Each pair is labeled with its protected wavelength — use the glasses that match the active laser. ANSI Z136.1 compliant.
4 specs4 capabilities2 refsOPERATIONAL
SPECIFICATIONS
ProtectionOD6+ optical density for target wavelengths
Coverage1064nm fiber, 450nm diode, 10.6µm CO₂ — wavelength-matched pairs
StandardANSI Z136.1 — laser safety rated
UseAny laser operation — cutting, engraving, welding, cleaning
CAPABILITIES
OD6+ optical density — blocks 99.9999% of target wavelengthWavelength-matched — 1064nm, 450nm, 10.6µmANSI Z136.1 ratedLabeled per wavelength — no guesswork
TRAINING_&_REFERENCE
📝
Laser Glass Protocolnote
Match glasses to active laser wavelength — labels are on each pair. Inspect for scratches or damage before each use — any compromise means replacement. Laser glasses are NOT interchangeable with UV glasses or general safety glasses.
📝
Mandatory Fornote
Required for ANY laser operation — cutting, engraving, welding, cleaning, alignment, observation. No exceptions. Reflected beams are as dangerous as direct — glasses stay on until laser is fully powered down.
NOTES
Wavelength-matched pairs for each laser in the shop. Labeled clearly. Replace if scratched, pitted, or if the frame loses integrity. Laser glasses degrade with UV exposure — store in cases, not on the bench.